Has anyone used (or known someone who has)Painless Wiring's 69-72 GM MuscleCar wiring harness ??? My dash harness is cherry and I have factory tach/gauges.I would spend about what a painless harness would cost on engine/front light/intermediate/trunk harnesses.Does anyone know if the painless harness would work on the factory tach/gauge package ??? Thanks Everyone.Shawn (also not concerned with 100% factory correct for 69SS Here)

------------------

you probably should ask them at painlesswiring.com they are pretty friendly and i will check my catalog and see if i can find what you need jk

------------------
members.aol.com/jnkb2cool/chevelle9.jpg (http://members.aol.com/jnkb2cool/chevelle9.jpg) members.aol.com/jnkb2cool/350.jpg (http://members.aol.com/jnkb2cool/350.jpg)
John Krenn
1970 malibu SS look-a-like well kinda
307/200-4r (soon to be 355)

Ft.Worth, Tx

Painless' stock replacement harnesses are made by M & H Electrical Fabricators, Santa Fe Springs, Ca. Painless does make their own hot rod from-scratch looms for street rods, but not the stock replacement and modified stock looms for our musclecars.

M & H deals directly with the general public, and has the web site:

www.wiringharness.com (http://www.wiringharness.com)

Hope this direct link works, first time I have tried it.



[This message has been edited by IgnitionMan (edited 12-19-99).]