I have looked everywhere i can think of, but cant find it.

Can someone tell me how much to torque the bolts that hold the pressure plate to fhe flywheel?
Its a SBC w/ a muncie 4 speed.

thanks
-Matt

------------------
TC Member #1434
1971 Malibu 350/TH350 (383/200-4R/12bolt in the works)
"It's not how much blood and sweat it took to get there, it's whether or not you have what it takes to finish it."
CAR (http://albums.photopoint.com/j/ViewPhoto?u=1268573&a=9389287&p=32040958)
ENGINE (in car) (http://albums.photopoint.com/j/ViewPhoto?u=1268573&a=9389287&p=32040790)
NEW 383(soon to be in car) (http://www.chevelles.com/showroom/mattleuckmotor.jpg)

Depends on the bolts.
If you used aftermarket bolts, check with the manufacturer. ARP has torque specs on their web site for their different grades of bolts, and different types of lubricants. (motor oil, ARP assembly lube)

If you are using stock fasteners, the Haynes manual says 35 foot pounds.

-==-
dave

Thanks Dave.

-Matt

According to '65 Service Manual: for 327 SB 3/8-16 thread size and 25-35 lb. ft. for clutch pressure plate.