I'm trying to remove a 68 wiper switch, and can't seem to understand how it comes off! The service manual said remove set screw from knob, then remove knob from shaft, (my knob just pulled off!), then remove retaining nut, and withdraw wiper switch from behind console. I've got the dash removed, and on a bench, so access is no problem, but I cannot find the retaining nut that the manual talks about! Anyone help? -thanx, Al

The retaining nut is behind the switch bezel. I think that a 1/2 deepwell socket works to remove the nut. I hope this helps.

------------------
Nathan Brandt
The more cubes the better!!!
70 SS 396 4spd under restoration
71 SS 454 clone 8.8 1/8 on pump gas and 8" slicks
60' 1.949 & 77 MPH
Team Chevelle # 1143
My 71 SS 454 clone (http://www.chevelles.com/showroom/nate71.jpg)

This may help.

click for pic (http://imagehost.auctionwatch.com/bin/imageserver.x/00000000/azss/WS3.jpg)

[This message has been edited by Elree Colby (edited 02-09-2002).]

Thanks, Elree, and Nate, Came right off! -Al