http://www.flaming-river.com/combo-kill.htm

I need help on wiring up this switch correctly ...... Flaming River Combo Alt and Battery Kill swith ...... stock 61 amp external regulated alternator and stock distributer mod'd by Dave Ray to accept MSD module ..... FR instructions not clear to me on correct way to wire with this set up
.....
currently mocked up with positive bat cable in to one pole and out other pole back to bat with a 12ga wire to starter and a 12 gauge wire to ignition switch area ?? from specified terminals on switch, supplied resister install seems clear on intructions so should be able to wire that in ....... based on my interputation of instructions !!!!!

All help appreciated Thanks Bill

Dont know that switch, but if you email me a wire diagram I can try to help.

Thanks for the offer .......I got a reply from Flaming River and with my set up they advised to wire up like a coil system on instruction sheet which has wires going to the ignition /coil wire ..... none to alt.