Anyone got an original starter harness and blower motor wire in there 70? According to the assembly manual it looks like they are two clips that bolt to the heater box.

I was wondering if thease clips are identical? I have two clips but, they are not the same.

Secondly are speed nuts used on thease two studs like the rest or are they regular nuts.

Thanks! Just trying to make this baby clean!

John

Since no one else has chimed in, I usually only see one and it is located on the bottom engine side stud. It is held on by a speed nut. I think there may have been another clip used which was part of the harness if a noise supressor was used but I have not ever seen that.

------------------
ACES #5032
TC #1074