68Elkie
Nov 22nd, 02, 7:56 PM
John, I read Bob's post, and it's a good explanation of how the motor works, but doesn't help me yet. In checking the wires on my motor, I found that only the pump wires were plugged in. The other plugs were just sitting on top of the spades on the motor. I got sparks when trying to connect them.
My motor has four spades, 3 horizontal, and one single spade above them. I have two plugs, one with one connector and one with two connectors. There are three wires going into the two connector plug and I'm getting 12v from the yellow wires.
All four spades on the wiper motor show continuity to ground. Reading Bob's post, I wouldn't expect any of these to be grounded. Now what do I do? Pull the motor apart?
--
Ed
My motor has four spades, 3 horizontal, and one single spade above them. I have two plugs, one with one connector and one with two connectors. There are three wires going into the two connector plug and I'm getting 12v from the yellow wires.
All four spades on the wiper motor show continuity to ground. Reading Bob's post, I wouldn't expect any of these to be grounded. Now what do I do? Pull the motor apart?
--
Ed