just like the topic says. I extended this post from camaros.net only because my friends site that I use for image hosting only works with a select few sites to save bandwith. any way my problem can be seen at this address

http://www.camaros.net/cgi-bin/forum/ultimatebb.cgi/topic/10/3276.html?

anyone on this site use the painless muscle car harness and the guuge harness for autometer gauges?

anyone?? ttt

The terminals in the first pic are called PC bow terminals. They are used along with the factory harness cluster connector. This (http://www.chevelles.com/showroom/Elree/bc1.jpg) pic shows a cluster connector. As can be seen, use a small screwdriver to remove the old bow terminals from the connector. A small tab on the back of the terminal needs to be bent flush to allow removal. Make note of the color locations, the new wire colors should be the same. This will allow you to connect the new wires to the existing cluster. I can't tell, from the pics, what's on the other end of the wires. Maybe a pic of all the wiring would help.