LTLCRZY427
Feb 4th, 02, 10:14 PM
I'm kicking around the idea of upgrading my current stock alternator to one of those nifty CS130 alternators. I'm already buying a new engine wiring harness that can be fitted with the proper connectors for the alternator. My question are:
1) Can I make this look fairly stock?
2) Is this the best route to go? Car doesn't have a major stereo, but does have a MSD ignition and possibly EFI in the future. Is it overkill?
3) Can I make it bolt up in the stock location? I read the tech article on the alternators, but they were all on a small block, and this would be for a big block. Thanks in advance!
------------------
1969 Caprice 4400LBS!!
454/M-20
12-bolt 4.10 Posi
13.45 @ 105
323HP @ 5200RPM
382lb-ft @ 3300RPM at the wheels!
Andy and Nick's Muscle Car Half-way House (http://www.public.iastate.edu/~amcarthu)
1) Can I make this look fairly stock?
2) Is this the best route to go? Car doesn't have a major stereo, but does have a MSD ignition and possibly EFI in the future. Is it overkill?
3) Can I make it bolt up in the stock location? I read the tech article on the alternators, but they were all on a small block, and this would be for a big block. Thanks in advance!
------------------
1969 Caprice 4400LBS!!
454/M-20
12-bolt 4.10 Posi
13.45 @ 105
323HP @ 5200RPM
382lb-ft @ 3300RPM at the wheels!
Andy and Nick's Muscle Car Half-way House (http://www.public.iastate.edu/~amcarthu)