Hey guys, I'm about to get rolling on dying a bunch of interior parts.

The original color of my '72 interior is dark Green, though I have some pieces that are black (mix and match).

I am going to order some SEM Landeau Black, plastic prep, and vinyl prep, and probably some of their no-sand primer.

My question is after I do the dye work, do I have to follow it up with the low-luster clear or can I just leave the dye as the top coat?

Mark

------------------
1972 Chevelle,1995 Caprice Wagon, 1997 Camaro Z28 (for Sale)
Website: http://home.fuse.net/caprice
Team Chevelle member 1997

I wouldnt use any clear, I've seen an interior coated with a clear and it gave everything that painted look. looked cheap.

------------------
Michael


T.C. member # 758
ACES member # 4292

69 malibu convertible
69 malibu h/t 307/pg
<<this space reserved for 66/67 chevelle BB/4spd>>
01 gmc sierra

Thanks, I'll just stick with the dye then.

Mark

hey i was just wondering where you are ordering the SEM dye from?

thanks.

l. garcia

I'm ordering it through the Eastwood Company.

Mark

------------------
1972 Chevelle,1995 Caprice Wagon, 1997 Camaro Z28 (for Sale)
Website: http://home.fuse.net/caprice
Team Chevelle member 1997

FYI,you can buy SEM dye around here at at few autobody supply stores.

------------------
My 70 SS396 (http://www.chevelles.com/showroom/mr4speed70SS1)
Engine pic (http://chevelles.com/showroom/mr4speed70SSengine2)
My Black Cherry 70 SS454 (http://www.chevelles.com/showroom/mr4speed/Picture025.jpg)
The launch (http://www.chevelles.com/showroom/CClaunch.jpg) 13.13 @ 101.490/1.92 60 ft. with radials,2.73's,and thru the mufflers
1.90 Best 60 ft.
101.84 Best MPH
My Drag Race page and combo (http://www.prestage.com/site/site_display.asp?SiteID=589)
1968 Oldsmobile Cutlass convertible
1985 Cadillac Eldorado (daily driver)
Chris Corwel,TC Member # 785
Member # 141 AMCA

SEM dye is actually vinyl/plastic paint for the plastic parts. I mean how do you "dye" plastic? It can't be done. Anyway, i used the Landau Black and it came out perfect. Don't coat it with anything else....JM2cents

Get your SEM here - It's $2 a can cheaper and a much better selection:
http://vinylpro.safeshopper.com/29/cat29.htm?145

Shipping is very reasonable as well.