Are there any tricks to installing a re-production rubber mat in a 1965 chevelle 300 series in the interior

I haven't needed to replace mine to this point, may have to in a few years though. there have been a couple of members on here who have done it with their 69's and the main advice they gave was to get the mat as flexible as possible by leaving it in the sun for a while or getting it heated up some other way. Good luck.

Thanks for your help.Mark

When I did my '69, what really helped was putting the mat in the car then putting a small electric heater in there for about 1/2 hour with the doors closed and windows up. It really softens it up and makes it much easier to fit to the floor pan and trim.