This is the "Permatex vs. 3M" thread.

I used permatex on my trunk and driver's side door weatherstripping. The stuff seemed pretty easy to apply, just make sure you have it opened up enough at the tip or its going to be a slow job and you will probably get a sore hand. (minds out of the gutter gents) It seemed to take a little time to set up, but I was pretty happy with it. It is also very tidy.

Today I wanted to install my weatherstrip channel & roof weatherstripping and while I was picking up some things at the auto parts place, I thought I'd give the 3M stuff a shot. First thing I noticed was, cool, on the end of the cap is a point for puncturing the seal on the tube. There is no adjustable tip, and I quickly found out why. This stuff is RUNNY! It wasn't even 40 degrees out in the garage. What a mess it made. Its all over my hands and it isn't easy to get off. The thing I like is, this stuff seems to set up pretty fast.

I think I'll use the permatex stuff for the pass. side door. I dont' want to have to sandblast my hands again to get the black gunk off.

Was the 3M yellow?

You want to use 3M part number 08008 not the 8B stuff. Both say super weatherstrip why I don't know.

No it was black stuff. Thanks for the PN Brob, I'll make sure I look for that next time.

For the weatherstrip chanel to body seal I found some 3/4 inch weatherstripping that worked great. Scraped off the old butyl (whatever it is) and the new stuff had an adhesive on one side. Of course, I won't really know how good it works till the car is on the road.

permatex is not good for this job. factory used 3M type. yellow snot.

just did my trunk seal tonight i had the super weather strip adheisive black ran out so i got another tube it was yellow i didnt even know it came in yellow . what is the diffrence? i used it anyway so go slow and be careful.