|
jack Feb 15th, 02, 4:18 PM Guys, Do I need to remove the windshield in order to remove the Dash Pad from my 65 Chevelle? If not are there any hidden screws I should be aware of? I also need any tips on gauge bezel? removal. Thanks, Jack RussD Feb 15th, 02, 5:24 PM Jack Gauge Bezel is held in with the screws around the permiter of it(like on the flat parts) you'll have to drop the column a little bit to get it out too. Dashpad comes off without removing the windshield. There are a whole bunch of clips on the underside of the dash that it attaches with. I'm sure others will elaborate if im not making sense! good luck! ------------------ Russ (or Steve) 1965 Malibu 283/PG/A/C (http://www.chevelles.com/showroom/SteveD64SSside.jpg) Now 283/TH-350 soon to be 383/TH-350 My Homepage (Updated 5/31/2001) (http://www.angelfire.com/ca4/chevelle/) Team Chevelle Member #71 Wes V Feb 15th, 02, 6:41 PM The dash pad is held on with nuts (not clips). The pad it's self has studs that fit through the holes in the top of the dash. Yes, there are a whole bunch of them and even with everything removed from the front of the dash, it's a pain to get to all of them!! You don't have to remove the windshield. ------------------ Wes. Vann Technical Reference section Gold Member #5 | ||