As I said awhile ago, I was looking for another frame... Well, I am going to look at a 66 frame for my 67 malibu. What should I be looking for? Any places these frames liked to crack? I don't have any experience with buying a frame and I don't want to come home with junk. Thanks for any tips you have.

------------------

.....Joe
"67 Malibu"

Joe check around doglegs in back and up on the shock mounts. They usely crack there.Also check where the steering box bolts go through the frame. I have seen a lot rust holes in this area.

------------------
CFR.

And get a bill of sale with a copy of (or the original) title to go with it. Frame changes need to be documented to keep the law away.

Joe, I did the same thing with my '67. Put a '66 frame under it. Just remember that when you go to buy rear suspension pieces, make sure you specify that your ordering for a '66. Springs and such are different so be aware of that. Anyway, good luck

Thanks for the ideas, guys... Good advise shvel, I would have never guessed the 66 suspension differed from the 67. I would have thought they were the same http://www.chevelles.com/forum/redface.gif Thanks, that could have been a big problem.