Does anyone know how hard it will be to replace an idiot light cluster with a tach cluster? I am conserned about the wiring harness matching. My current clusters printed curcuit board has melted and needs to be replaced so i figured i would upgrade if it is an easy swap. thanks everyone.

It's been done a lot, but I wouldn't exactly say it's easy. Your best bet is to obtain a service manual completel with wiring diagrams. I think you'll have to spring for a wiring harness for the dash, unless you're real good with wiring. The existing harness can be modified, but it's best left to someone with a lot of experience in automotive electrical systems.

http://www.endrud.net/gauges/

Try this out for size I may have some more info stored on my HD if this doesn't have enough.

------------------
Deon Knecht
72 Malibu 350 that has been bored out to 4.251 on a 4" stroke.

<A HREF="http://home.sc.rr.com/deon" TARGET=_blank>
My Website Last updated on 10/9/2002 </A>