Chippen
Aug 5th, 99, 5:39 AM
I´m about to put in an 1989 350" and an TH700R4, and I do needs an electicalwireingdiagram for an 1989 TBI equipped vehicle.
|
chev-hell Aug 5th, 99, 4:22 PM you can get the harness thru a shop they make them for hot rodders so you don't have to use all those sensors etc. just check at any swap meet and as for the 700r4 you will have to move the crossmember, lines,cut the driveshaft, etc. to do this job it's something i was concidering but a lot of hassle so i decided to just keep my older engine and rebuild it when need be and go with a 200 4r tranny that is an overdrive but same size as a 350 turbo tranny. jk ------------------ members.aol.com/jnkb2cool/chevelle.jpg (http://members.aol.com/jnkb2cool/chevelle.jpg) John Krenn Ft.Worth, Tx BillK Aug 5th, 99, 5:27 PM Chippen, Painless Wiring makes harnesses for this purpose. They usually advertise in Super Chevy. ------------------ Bill Koustenis Advanced Automotive Machine Waldorf Md 1971 Heavy Chevy - original owner Team Chevelle #100 | ||