how do you connect the hog rings to the part on the seat covers thats supposed to go threw the groovs or slots in the foam this is a pain in the a$$ is there a way to do this easier than what i have tried do you go whrew the back with the hog rings or but it on the cover first then go threw the foam to the metal can any one help me with this question

I'm not an expert,this is how I did mine
Snug foam with a few hog rings
Hog ring through cover then through foam to seat wires(not from underside or backbackside depending if its the bottom or back of seat your working on)
Work from rear to front on bottom sections
Work from bottom to top on back sections
Fold corners over last using hairdrier to help stretch them in place then hog ring the edges last
Keep things as straight as possible as you go
Good Luck!

hey thanks for the help thats the way i was going but its a pain to get them rings threw the faom and on to the metal in the back
other wize covering thses seats is a breeze

A trick that I read on a prior post was to use nylon tie straps. Worked great for me when I did my buckets.