|
: Placement of 350/4bbl throttle cable bracket. Riffers70 Mar 17th, 99, 1:04 PM I own a 1970 Chevelle has a 307/bbl. I need the placement of the throttle(accelerator)cable bracket. Since the 307's did not have 4bbls I need the location of the 350/4bbl stock bracket. Does it get mounted on the rear carb stud, or on the last two intake manifold bolts? Thanks!! Fred BillK Mar 17th, 99, 6:42 PM Fred, Just went through this whole thing last week. Here is my post and the answers http://www.chevelles.com/forum/Forum1/HTML/001500.html Hope this helps. Bill K Riffers70 Mar 19th, 99, 3:28 PM BINGO!! Yup..did...will be under the hood in the morning putting finishing touches on the setup. Thanks! Fred Riffers70 Mar 22nd, 99, 6:01 AM I had ordered the bracket and calbe for a 68-72 SB, other than High Performance. The cable is just a little over an inch longer and the bracket mounts on the rear carb stud. Everything fit exactly right and snug. Couldn't have been any easier. Fred | ||