|
Chris64SS May 2nd, 99, 9:56 AM I have a 64 Malibu SS and I have a slight problem. The lever on the steering column that actuates the turn signals is missing. Can I buy just a new lever or do I need to replace the whole column? Until it gets fixed, is there a way that I can rig up a setup so I can use my turn signals? Thanks, Chris Steve Johnson May 2nd, 99, 1:51 PM Chris, there are reproduction levers available. Year one has them for tilt and non-tilt columns for $15.00 and $14.00. They can be reached at 1 800 950-9503. Chris64SS May 2nd, 99, 5:31 PM Thanks Steve. I am supposed to be recieving their catalog soon and the lever wii be one of my first buys. Al May 2nd, 99, 6:11 PM geesh guys, Year One couldn't give a rat's *** about us. (believe me on this) Ground Up has them for a 64: IT-3028 1964-67 without tilt --- $11.95 ea You are welcome to buy from whomever, but we would sure like to see our sponsor get the support! www.grounduppm.com/ (http://www.grounduppm.com/) ---- Al - banging head on wall [This message has been edited by Al (edited 05-02-99).] Steve Johnson May 2nd, 99, 8:45 PM Sorry Al. I took a quick look at the Ground Up catalog and didn't see anything under steering columns or turn signals. After a second look I do see that signal levers are listed with Tilt Levers. MoeMan May 2nd, 99, 9:21 PM You're killing me Al. (In a good way,what a reply! so how do you really feel?) I have never dealt with Ground Up so I checked out their site, glad I did. I was going to powder-coat my rally wheels but it looks like I can purchase 15x8's already powdercoated for not much more than what it would cost to do mine. Think I'll call for the cataloge tomorrow. Thanks for the kick in the head. Fred Ont canada May 3rd, 99, 4:43 PM Hey AL you know whats good about banging ones head on the wall? It feels good when you stop!Sorry guys...FRED | ||