I have a factory p/s bracket that Iam not sure were it bolts to. I think it bolts to the driver side motor mount on the side of the motor and the other one bolts to the two holes were the 55-57 motor mounts go. Is this correct? This for a long water pump and a small block. Also, who has the best AC conversion kit. My 67 is a factory AC car but I don't want to put everything back in the finder and I want to clean up the firewall.

[This message has been edited by Texas67 (edited 04-05-2002).]

There should be 3 bolts in the main bracket that bolts where you said. The little adj.bracket on the back of the pump bolts to the ex. manifold. If you got headers on the car, you'll have to make some changes to make it fit.
This is for BB cars, not sure on SB cars and you did'nt say what you were working on.

[This message has been edited by CFR (edited 04-05-2002).]

<BLOCKQUOTE>quote:</font><HR>Originally posted by CFR:This is for a small block.
There should be 3 bolts in the main bracket that bolts where you said. The little adj.bracket on the back of the pump bolts to the ex. manifold. If you got headers on the car, you'll have to make some changes to make it fit.
This is for BB cars, not sure on SB cars and you did'nt say what you were working on.

[This message has been edited by CFR (edited 04-05-2002).]<HR></BLOCKQUOTE>