|
Clueless Feb 21st, 01, 11:06 AM I am in the middle of replacing all the bushings in my 66 Chevelle hardtop with Polygraphite. My one problem is that I cannot find a set of upper/rear coil spring isolators (polygraphite or stock rubber). Does anyone have an idea on where I can find a set of new ones or a makeshift way to create some new ones (rubber hose?) Thanks, Shane bb67H-D Feb 21st, 01, 11:30 AM Ground up carries them as do most chevelle parts vendors. GM pairs are about 10 bucks a pair for the rubber replacments. ------------- Brett '67 SS396 clone Clueless Feb 21st, 01, 1:47 PM Thanks for the reply. I contacted Ground Up and they confirmed that GM has ceased production on the isolators. I will have to create something or go without. <BLOCKQUOTE>quote:</font><HR>Originally posted by bb67H-D: Ground up carries them as do most chevelle parts vendors. GM pairs are about 10 bucks a pair for the rubber replacments. ------------- Brett '67 SS396 clone<HR></BLOCKQUOTE> bb67H-D Feb 21st, 01, 2:30 PM Check ebay theres usually a few pairs on there and they go between $8 - $20 for GM rubber pairs. Mike @ reds I'am sure has some NOS coil pads as would other chevelle yards. ------------ Brett CFR Feb 21st, 01, 4:03 PM Year One has them. I just got a set from them 3 weeks ago. ------------------ CFR. 67Sedan2dr Feb 21st, 01, 6:13 PM National Parts Depot has them for about 20 buck a pair. Just replaced the rear springs in my 67. Uncle Feb 23rd, 01, 8:25 AM Shane, don't go without! You'll regret it. I don't remember the part number, but I got some Moog insulators at the same time I got their springs. Keep looking. I'll see if I can find a part # for you. I paid about $3 each. ------------------ Phil "I don't believe I'da told that" Clueless Feb 23rd, 01, 12:46 PM Thanks for all the help everyone. I found a pair at National Parts Depot. <BLOCKQUOTE>quote:</font><HR>Originally posted by Uncle: Shane, don't go without! You'll regret it. I don't remember the part number, but I got some Moog insulators at the same time I got their springs. Keep looking. I'll see if I can find a part # for you. I paid about $3 each. <HR></BLOCKQUOTE> 97LT169SS Mar 29th, 01, 11:47 AM Energy Suspension has isolaters! I've got them on my 69 Velle... Good luck (contact PST if you need help) Mike ------------------ jodysss396 Mar 29th, 01, 2:02 PM What do they look like? Is it something you could cut out yourself from some thick rubber belting? If so, find out how thick they need to be and I can send the pieces of flat conveyor belting to you to cut them out to fit. Jody ------------------ jodysss396 (or Jody) 1969 Chevelle SS396 Fathom Green Numbers Matching TC member #921 A.C.E.S. #4348 cjlandry Mar 29th, 01, 2:48 PM Mine are from Energy Suspension. Paid around $4 for them at Jegs. ------------------ My Elky Page (http://www.geocities.com/chadjlandry/index.html) (updated 3-15-01) "Think for yourself. Don't let popular opinion make your decisions for you." Chad Landry TC Member #643 '68 El Camino badchevelle Mar 29th, 01, 2:59 PM Energy suspension. Summit or Jegs. pneu2roll Nov 19th, 07, 7:45 PM Could any one verify if MOOG Part # K62032 is a good part# for 65 malibu rear spring insulators? | ||