|
Slime Dec 3rd, 99, 1:46 PM I have a engine I believe to be a 327, butam not sure without taking apart can anyone help? These numbers are on the block near the water pump. There is a lip there that has these numbers, they are FOI24HCH. Thanks Slime 1970chevelle,dave Dec 3rd, 99, 5:35 PM i checked your number and this is what i found. F= made in Flint 01 (i think that the "I" should be a "1")= made in january. 24= 24th day but i couldnt find anything on the last three letters (engine suffix code). i would recheck them. that is a great place for grease and oil to accumulate. i misread the code one time on my 350. i thought that it was from a vette and i got all excited and rechecked. it was actually from an elcamino. and give this site a try after you check it. www.stc.net/~iracez28/spmen.html shooter Dec 3rd, 99, 5:54 PM I show HCH as 1966 impala 327/275 hp w/holley carb, PG Trans Rene 66-Malibu Slime Dec 3rd, 99, 9:32 PM Thanks alot guys! I re-checked and the last seem to be HCH. I though it was from a pick-up, is that possible? Thanks again. Slime ------------------ Steve Slime Dec 4th, 99, 12:55 PM I looked at the numbes on the rear of the block and they are 3858174. Thanx again Slime ------------------ Steve Slime Dec 4th, 99, 12:56 PM I looked at the numbes on the rear of the block and they are 3858174. Thanx again Slime ------------------ Steve CFR Dec 4th, 99, 3:46 PM Slime . I could not find that no. in my book. I did come up with 3852174. I wonder if you read the 2 as an 8? If you did this block was used in 65-67 in all but chevy11. From your other no. i have to agree with shooter on the 275 hp 327. ------------------ CFR. shooter Dec 4th, 99, 6:38 PM I show 3858174 as 1964-1967 327/275,300,350 car and truck The actual cast date, and model year is also coded on rear of engine. Rene 66- Malibu | ||