|
BAD415 Jan 17th, 01, 11:37 AM The gears are shot in my 65 Convt quarter window regulator. Hardtop reg won't work, it has different geometry, bolt pattern..etc. I have the opportunity to purchase one out of a 66-67 convt. Are these the same as 64-65? My Hollander interchange doesn't cover these. chev64 Jan 17th, 01, 2:39 PM BAD, Do you have an assembly manual? the part # might be in there to reference. ------------------ Leo Paugh Maryland Chevelle Club #017 A.C.E.S.#3731 Goals are dreams with deadlines. Maryland Chevelle Club (http://www.clark.net/pub/chevelle/mcc.htm) JimC Jan 18th, 01, 8:19 AM If it is just the small gear that is shot, the housing rivets can be drilled and the gear and spring replaced with ones from another regulator. Check that they are the same. Re-rivet the housing back on. I did this on my 64 HT, using the gears out of a wrecked 4 door. Used the gears from the back door, as they were nearly new in appearance. Total cost was only a few dollars. Good luck | ||