|
Justin Mciver Jul 30th, 99, 9:07 PM I have two spare crager SS rims and am going to sell them to a buddy. he drives a 67 mustang and the bolt spacing is diffrent on his rims. since the holes on the cragers are and oval does that mean they can fit many diffrent bolt spacings? we test fit them and the look like they fit fine. I just want to be totally sure and not screw over a friend u know? even if he does drive a ford http://www.chevelles.com/forum/smile.gif . Justin Mciver Philip Jul 30th, 99, 9:35 PM Justin, They should fit your friends Ford. Just make sure he uses the correct lug nuts. ------------------ Philip Valentine Team Chevelle Member #42 GOLD philip@chevelles.com chev64 Jul 31st, 99, 1:30 PM To add to the above post; and the correct washers. ------------------ Leo Paugh Maryland Chevelle Club #017 Quadzilla Jul 31st, 99, 2:39 PM I had the same problem... you must use the Cragar Off-Set washers... there is no question abaout it. ------------------ Francis Taracido Gold# 201 :) Sniper0666@aol.com History shows again and again how nature points out the folly of man. Oh No! You Know She's Got To Go! Go Go Quadzilla! members.aol.com/sniper0666/page/index.html (http://members.aol.com/sniper0666/page/index.html) OrrieG Jul 31st, 99, 8:43 PM Make sure the lug nuts are the right depth. I ruined a pair of used cragars by using lugs that were just a hair to long, wheel looked tight but was trash after one night of cruising. And as stated above use the correct cragar washers. ------------------ OrrieG 64 Malibu HT Survivor Gold Member #171 Justin Mciver Jul 31st, 99, 8:47 PM thanx for all of your help. I feel a lot better about pawning these off to a friend now. Justin Mciver | ||