|
monkeyboy Dec 18th, 00, 3:41 PM Is there a difference, (besides part #'s), between big block and small block water pump pulleys. I swapped a 396 in my 70 chevelle and the pulleys for the alternator, crank, and water pump seem to line up.I did put a new big block crank pulley on already. Court69SS Dec 18th, 00, 5:10 PM I also transfered a SB water pump pulley to my 396 and have no problems out of it for the past year or so since I did it. ------------------ No replacement for displacement!! 1969 Chevelle SS396 325hp/396 with Edelbrock RPM intake, 750 dual feed Holley, headers, HEI, Forged Steel Crank, M21 , 3.08 gears, and posi. One day... a Mustang Killer! My 69 SS (http://home.nc.rr.com/gregstoy) Don_Lightfoot Dec 18th, 00, 5:25 PM I'm no expert but they could very well be the same. However, the "High Performance" units (EG - Z/28 & 375hp/396) got the deep groove pulleys, the diameter could have been the same though. ------------------ ACES #4241, TC #947 69 SS Sedan (http://www.angelfire.com/rock/69ss) | ||