Posted id Trans. first. The linkage that connects the transmission to the carb. How is this linkage adjusted properly? This is on a '68 powerglide setup.

STEP 22 Throttle pressure linkage adjustment: Be sure carburetor is opening fully. Disconnect throttle pressure linkage from carburetor. Hold carburetor lever to full open position. Move throttle pressure linkage toward carburetor and be sure linkage is at its full travel position when it lines up to carburetor. Adjust linkage arm as necessary to get full travel at wide open throttle position

I found this procedure after searching around a while on the net.Here's the link if you want to read further.

http://www.tciauto.com/instructions/280000_inst.htm

Thank you very much.