I got one of them all around throttle brackets , but it dose not seem to work with my old stock
cable, i have a holley carb. so any help would make my day, by the way i'm not trying to go broke on some high end LOKER SET UP . ;) its just a
good street beast , not a show car
thanks

I don't know what year car you have or what kind of end you have on your cable. But I can share this: I have a 68 with a small block and a holley 650 dp.

I got a new throttle cable from the dealer. I don't remeber the application though, but I think it was for a 327 something or other. It has the round end that mounts in the bracket. Unlike the mid 70's ones I was familiar with that had the square bracket mount.

The bracket I used I got from one of the resto parts places, and it was for a BB chevelle "w/spec hp", meaning basically, for a Holley carb. It mounts under the carb stud, on top of the holley, and there's a tang on the bracket to fit the notch in the carb, to hold the bracket straight. There's also a return spring hole.

I like the stock look, I didn't want a fancy expensive custom cable. Take a look at Ground Up....the cable I have is the same as their ATH-3369, and the bracket is their ADT-0014. Other places have these same parts too.... smile.gif

chris

OH YA I FOR GOT , its a 70 chevelle with a bb
and it has the cable with the rubber (round)
pice that looks like it clips on to the bracket
the rubber is so old that its hard and just cracked when i tryed to put it on the new bracket i got , i want to keep that stock look

A replacement cable assembly is still available from GM.
Reasonably priced, too.

I've got the fancy Holley wrap around throttle bracket and lokar cable...hey, it works graemlins/thumbsup.gif