|
: How's About Another Silly Question? SLOOPjohnB Sep 4th, 99, 6:24 PM How do you remove an inside door handle from a '67 Malibu? I can't see anything holding it on? ------------------ John Baird LaFollette, TN 1967 Malibu 4DR 283, 2-Speed dab67 Sep 4th, 99, 6:34 PM there`s a wire retainer clip behind it that locks it on the shaft, just pull it out and it`ll fall off. ------------------ David Al Sep 4th, 99, 7:49 PM We are getting waaay too big for our own good. There was an excellent topic on this quite awhile ago and I can't find it http://www.chevelles.com/forum/frown.gif The closest I got was: http://www.chevelles.com/forum/Forum1/HTML/003277.html We may have to enlist a couple of members to try and help archive some of the better topics and answers so they are easy to find. 66 bowtie Sep 4th, 99, 7:56 PM Al good idea would be cool to somehow list them under certaint things like, front clip questions, rear end, 64 questions, 65, 66 and so on. my 3 pennys ------------------ OWNER OF A 66 CHEVELLE MALIBU http://www.angelfire.com/ca/nascar97/Chevelle.html page about the progress on my resto. still being made JWagner Sep 4th, 99, 8:59 PM There are several possibilities here: First is to get get the right tool to push off the "omega" clip , second is to drag a rag through the area between the handle and the door panel ,another is to use a putty knife to push the clip out , and of course the use of nuclear weapons should not be under-estimated. Rick Loncosky Sep 5th, 99, 5:24 AM Hey! Don't forget the almighty, slighty bent, screw-driver. http://www.chevelles.com/forum/smile.gif I used the same one for years. Rick.. 81ElCamino Sep 5th, 99, 8:45 AM Ah my multi purpose seal picks get so much use! One with a 90 degree end, or better one with a hook, makes short work of them darn clips! What I need are GOOD window handles to replace the crappy ones my dad bought at a local parts store? Dave H. Houston (Gee it's Hot!) TX CFR Sep 5th, 99, 4:03 PM i picked up the right tool at western auto for about $5.00 . Best way to do it. SLOOPjohnB Sep 5th, 99, 7:12 PM Thanks for the help guys. Now I have another problem. How do you get them back on? ------------------ John Baird LaFollette, TN 1967 Malibu 4DR 283, 2-Speed berry Sep 5th, 99, 10:19 PM I haven't done this in a while, but if I remember correctly just install the clip in the handle and then push it onto the protruding stud. It should snap in - then you're done! SLOOPjohnB Sep 6th, 99, 6:41 AM I want to thank everybody for all their help. I truly appreciate all of you for taking the time to help out a new guy. ------------------ John Baird LaFollette, TN 1967 Malibu 4DR 283, 2-Speed RagTop70 Sep 6th, 99, 8:30 AM Nobody has mentioned holding a small fishing hook with a pair of needle nose pliers and "fishing" for that !@#$%^& clip. Now someone has. ------------------ Mike formerly known as gotapileof70Malibu '70 Malibu '70 Malibu convertible North Vernon, IN | ||