|
: How thick of a Head Gasket is available for a BBC Pat_McNeil May 8th, 04, 9:49 PM Gentleman, I could really use some info on how thick a BBC performance head gasket is available for a Mark IV block bored to 4.350". I encountered some deck issues that I'm not too happy about. As always, much thanks in advance. Pat Wolfplace May 8th, 04, 10:55 PM You can order the MLS gaskets from Cometic in varying thicknesses. What are you looking for? As a side note, they are about the best gasket you can buy. Pat_McNeil May 8th, 04, 11:41 PM Thanks Mike, I'd like to go with a .056 gasket to give me .040 quench. My local machinist has to go beyond a Zero deck to square up the 454. Do you have a phone number or e-mail for Cometic? Regards, Pat Wolfplace May 9th, 04, 12:18 AM Originally posted by Pat_McNeil: Thanks Mike, I'd like to go with a .056 gasket to give me .040 quench. My local machinist has to go beyond a Zero deck to square up the 454. Do you have a phone number or e-mail for Cometic? Regards, Pat = I believe they have them in .051 & .067, I can check tomorrow for you if you email me. Their number is 440-354-0777 ;) | ||