|
Gene Chas Apr 26th, 99, 11:16 AM I'm assembling an L89 tripower for a '67 SS396 ( soon to be SS427!) and need a "stock" distributor. I'll run the Pertronix ignitor inside a standard Chevy distributor, but what's the best source for a new, 7000 rpm capable stock unit? ------------------ Wally Apr 26th, 99, 11:43 AM I use the corvette cast iron vacuum advance tach drive units. It is more than capable of the rpm and I use the Mallory unilte modules rather than points. Gene Chas Apr 26th, 99, 11:58 AM Wally, any source for fresh/rebuilt units? I was thinking of using the Pertronix ingnitor. Wally Apr 26th, 99, 12:41 PM Gene, I sent a message to your email account. Fred Aldrich Apr 26th, 99, 1:24 PM My opinion: Anything that fits is OK as long as you customize the vacuum and mechanical advance curves to something like the original specs. Original '69 L89 mechanical adv. spec. 0 deg @ 900 rpm 2 deg @ 1100 rpm 30 deg @ 3800 rpm Vac. Adv. Spec. 0 deg @ 8" vac 15 deg @ 15.5" vac Part number 1111927 This was a GM transistorized unit with a mech. tach. drive. [This message has been edited by Fred Aldrich (edited 04-26-99).] | ||