what is the common bore and stroke on a stock 327 out of a 68 chevelle malibu?

------------------
1968 Chevelle malibu w/ 327 bored .030 over, TH350 w/ shift kit
MyChevelle (http://www.cardomain.com/member_pages/view_page.pl?page_id=252044&make_type_query=make%3DChevrolet&model_brand_query=model%3DChevelle&tree=Chevrolet%20Chevelle)
12 bolt w/ 3.73's

307 = 3.875" x 3.25" (Gen.I, 5.7" rod)
http://www.mortec.com/borstrok.htm

4 x 3.25

thanks

------------------
1968 Chevelle malibu w/ 327 bored .030 over, TH350 w/ shift kit
MyChevelle (http://www.cardomain.com/member_pages/view_page.pl?page_id=252044&make_type_query=make%3DChevrolet&model_brand_query=model%3DChevelle&tree=Chevrolet%20Chevelle)
12 bolt w/ 3.73's

Oops,i thought i seen 307 http://www.chevelles.com/forum/biggrin.gif

A little 327 is a great small motor so you may just want to hop her up a schosh!!!!

Shoot for about 9.75 to 1 or so CR., with a pair of 170 port, 67 cc heads along with a 268HE cam or about a 230 duration at .050" solid, a set of 1.5" or 1.625" four tube, long headers. Top with either a 600 cfm 1850 Holley or a 3310-2, Hiolley 750 thats tuned to your engine size AND I will garrantee it will put a SMILE on your face if tired and geared right!!!

I gotta real big soft spot in my heart for the little early motors...pdq67

that is funny, thats pretty much what my setup is going to be!! except for the heads $$$ http://www.chevelles.com/forum/frown.gif getting the 268HE this summer, the 650 speed demon is in the mail, and the hooker comp. headers are already in the car!!
http://www.chevelles.com/forum/smile.gif

------------------
1968 Chevelle malibu w/ 327 bored .030 over, TH350 w/ shift kit
MyChevelle (http://www.cardomain.com/member_pages/view_page.pl?page_id=252044&make_type_query=make%3DChevrolet&model_brand_query=model%3DChevelle&tree=Chevrolet%20Chevelle)
12 bolt w/ 3.73's