|
LONGHAIR66 Nov 13th, 04, 8:05 PM I am in the process of building a 427/TH400 for my 66 Chevelle. It is now a 230/PG car. I need to now about frame stands and/or transmission crossmembers. Do I need to change them? Are the frame stands year specific? Anything else I should be aware of? I am planning on larger fuel lines, new radiator, etc. drptop70ss Nov 13th, 04, 8:13 PM trans crossmembers are the same, you will need a pair of v8 frame and engine mounts. Since you are starting from scratch you might as well get the correct BB frame stands and mounts, but SB parts will work if you have a line on a set. LONGHAIR66 Nov 13th, 04, 9:30 PM I don't really have a line on either. Are they hard to come by? Will other years fit? drptop70ss Nov 13th, 04, 10:24 PM 66-67 BB mounts would work, they should be available repro, but there is still plenty of original stuff out there. rich64 Nov 14th, 04, 8:05 PM There are 3 auctions running on ebay for V8 frame mounts. 1966_L78 Nov 15th, 04, 12:10 PM Longhair... Our Sponsor, Ground Up, carries the repros... Looks like $80 for the pair... http://www.ss396.com/pdf/newchevelle/1_27.pdf Scroll to page 13... #AMC-103 | ||