I installed a intake today. I for got do you install the distr. hei with the timming mark right on zero, then set the timming about 12-14degs BTDC. or do i set the timming mark at 12-14 degs and dropthe distr. in ? or what is the right way???? :eek: :confused:
info
454 motor cam was installed stright up

Robert-

Set timing mark 10(thats what i do)degress btdc on front cover. then set distributor with rotor facing at #1 on the distrutor cap. that should get you real close. hope that helps. tommy