70cst10
May 13th, 11, 8:14 PM
I'm swapping my manual drum/drum setup for front discs in my 64 chevelle. I have a 77 Malibu master cylinder (manual disc/drum).
http://imagethumbnails.milo.com/001/775/003/290/1775980_1368003_290.jpg
I can't say I know all that much about braking systems. My main question - is the larger reservoir for the front brakes?
Is there somewhere I can find the fitting sizes for the stock setup? I have a wilwood prop valve with 3/8-24 inlet/outlet. I'm thinking the best way to plumb this would be to reuse the distribution block with the rear outlet plugged with a longer line running up to the m/c for the rear brakes. I need to know what size plug to get and fittings for the rear line. Thanks guys!
http://imagethumbnails.milo.com/001/775/003/290/1775980_1368003_290.jpg
I can't say I know all that much about braking systems. My main question - is the larger reservoir for the front brakes?
Is there somewhere I can find the fitting sizes for the stock setup? I have a wilwood prop valve with 3/8-24 inlet/outlet. I'm thinking the best way to plumb this would be to reuse the distribution block with the rear outlet plugged with a longer line running up to the m/c for the rear brakes. I need to know what size plug to get and fittings for the rear line. Thanks guys!