jpclone54
Mar 27th, 04, 8:36 PM
I am looking for a nice big block stroker kit for a 454. I am looking for something in the 515 ci range any info or input is appreciated.
|
doggy69 Mar 28th, 04, 9:10 AM That isnt a very usual size....but a 4.375 bore and 4.25 stroke lands you at 512 pdq67 Mar 28th, 04, 4:34 PM And a 496" is a fairly common kit but smaller then you are looking for.. I don't know if this will interest you but have you considered using a stock Gen V or IV el-cheapo 502 block and boring it like .060" over and adding a Mark IV, 3/8" stroked crank using the crank adapter kit on it to make a 4.53" b x 4.375" s = 564" motor??? About the trickest thing in the rotating assembly would be the about 6.44" longer custom rods and the needed pistons to mate to them... I know I'm dreaming again but it can be done for not all that much money, imho..... pdq67 Milan Mar 29th, 04, 8:48 AM I was looking at doing a 4.5 or a 4.375 stroke crank in my talldeck project. seems like a 4.25 is no prob at all so I figured I would settle on a little work with the latter stroke. Milan Randy Mosier Mar 29th, 04, 8:58 PM http://www.strokermotor.com | ||