I am interested in converting my '69 convertible from power drum to power disk brakes. I researched which cars are compatible, I just need to know
What do I need for parts to do this?

Are you planning "Stock" disc brakes, or larger, modern aftermarket versions?
Either way, you'll more than likely needs hubs (Spindles) rotors, bearings, calipers, flexible lines that run from the calipers to the hard brake lines, the metal brackets that secure the union of flexible and hard lines to the frame. Also, probably a new master cylinder and the plumbing from the master to the distribution block.
That's a start. There are lots of kits out there that accomplish the changeover- worth considering...

Looking for a stock conversion. Will my master cylinder and booster for the drums work?

It's alot easier if you would by a kit. No, your master cyclinder and booster will not work for a disc brakes. Brakes are design as a system and must be use as a system to work properly. You are asking for problems if you try to sub in other parts. In other words. don't play a round when it comes to your brakes. They are much too important. I just converted from 4-wheel drums to 4-wheel disc. We changed everything. I would highly recommend it.

:cool: A kit is the way to go: $595.00 plus shipping from Ground Up. http://www.ss396.com/mm5/merchant.mvc?Screen=PROD&Store_Code=chevellecamino&Product_Code=FM-1790AS&Category_Code=BRAKES