I will be building a 383 ,as of now i have a 4 bolt main block a 383 stroker kit with 10.5-1 CR
750 holley dp, hei .but i need heads what will be the best all around hp/torqe heads to buy
i would like to get over 400 hp out of my set up
and good torqe seeing that it will be in my heavy 70 chevelle, i will be shoping for a cam
i'm thinking a roller cam and rockers
feel free to send me all and any info . by the way this will be a street / strip weekend only driver

AFR 195 if it'll be doing street duty. (the smaller runners should make more torque but will choke in the upper RPM)

AFR 220 (i think it's 220) for a race set up.(big runners breath better up high, but lose some low-end torque.)

There are a bunch of great heads out there...you just gotta choose one. AFRs are great, Brodix, Trick Flow, Edelbrock, Holley, World, Merlin, etc....

My Buddy's running a set of dart Heads on his 383 stroker and man does that thing pull!!! :eek:

I like my Dart pro 1 215cc. I put more miles on the street than at the track with a best run of 6.8 with a little shot in the 1/8 mi.
\ Mike

I have a set of Brodix RR200's with CNC chamber coming. Flow like AFR 210's through .500".
Depends on how big a cam your running whether you want bigger or smaller.
Wolfplace has good prices on both brands.
He has competitive prices on Isky stuff too since you might go roller.

WELL i would like to get 450hp and super nice torqe not sure what cam to get , and yes i would
be doing a roller cam and lifters , i want a good around strip and street cam mostly strip , gas milage means JACK to me , there too much oil out there in the middle east and i want to bring it all back to the USA , :eek:
anyway , i was leening towards the AFR 190 HEADS
so far but hay if there are heads out there that flow as well as them at a lower cost LET ME KNOW graemlins/thumbsup.gif

If you get a minor amount of porting, I think the Canfield's will out flow the AFR190's. Check Competition Products, I've seen ads for $750 bare for 195's. The site listed them as ea, so I ended up buying Brodix. Should've called first. :(
Or you can go with the Brodix RR200 cnc's but they cost more.

Since your a little low on the CR and the 195cc port, A UD/Luntati 276/284 SR would give you killer torque.
If you go with the bigger 210 port, then more cam would match. Like a 286/295 or similar.
A lot of the bigger ports don't come with the small chamber, so plan a head.
Some of the bigger heads come set up for a roller already though. I don't thnk the 195 does. At least not for $1275.