|
ferrill Dec 18th, 98, 5:47 AM I replaced my bolt rear with a 12 bolt, which was pretty straight foward. The old shaft is the correct length,so that was a good thing. It looks like the rear joint (pinion side) is a hair too short. I have approx 1/16 of an inch side to side play. Not in the caps. Is there a different joint for a 12 bolt vrs a 10 bolt ? Thanks for any info JWagner Dec 18th, 98, 9:23 AM You may need to look at U-joints with unequal lengths across the bearings. That is, one part of the joint will fit your shaft and the other (longer) part will match the pinion flange. Scooter Dec 18th, 98, 10:00 AM The joint that JWagner is referring to is called a conversion joint and is available through Spicer. The part # is 5-3022X. ferrill Dec 19th, 98, 1:49 PM Thank you very much for your help !!!!!!!!!!!! | ||