Thought I'd show you some new wheels NewGen just finished.

We're using a new forging that allows us to give the wheel a CONCAVE profile. If you are not familiar with the term, notice how the spokes curve outboard, not inboard, and give the center the appearance of a "bowl". We're even able to do "deep" concave for rear wheel fitments. These are both shown in standard concave.

In some cases, it is possible to put concave wheels on the front, and deep concave on the rear if the offsets and the wheel width permits. For more fitment information, feel free to call us!

Key features:



6061-T6 Forged Aluminum
3 piece construction
18" through 24" diameter
Soft lip only
Custom bolt pattern
Custom offsets
Custom finishes, including chrome
Custom caliper clearances
Aluminum caps
Hidden hardware, or exposes hardware options on every design


This one is called the "Spyder", shown in matte black center with chrome outer, and hidden hardware:

http://i37.photobucket.com/albums/e99/Hensons/IMG_1672.jpg
http://i37.photobucket.com/albums/e99/Hensons/IMG_1682.jpg

This one is called the Descendant, shown in gun metal center with chrome outer, and exposed hardware:

http://i37.photobucket.com/albums/e99/Hensons/IMG_1726.jpg
http://i37.photobucket.com/albums/e99/Hensons/IMG_1717.jpg

Those are freaking off the hook Jon...hit it right out of the park with those!:yes: