I thought I would see what the pro stars would look like. What do you think?


http://www.imagestation.com/picture/sraid148/p801c0f7fa85880464b0352483cc9c3c3/f620afa8.jpg
http://www.imagestation.com/picture/sraid148/pbeaba32e5dd5e9983979d14551a86daf/f620a851.jpg

I think they look little red X's.

Wheels look good,but car has to come down, especially the back end.

I like'm too. see my sig smile.gif I'm about ready to go back to Rally's though, except when I race.

Yea, for a quick rear lift I put a piece of 2x4 in between the rear axel and frame to raise it enough to take pic. Finally, I am not sure why you see red X’s

is your backspacing wrong or what? Those look like 15x10's with 295/50's maybe... should fit fine with 5.5" of backspacing.

Yes the backspacing is 3.5. I will most likely sell the 10’s and get another set with the 5.5.

Originally posted by Redmanf1:
Yes the backspacing is 3.5. I will most likely sell the 10’s and get another set with the 5.5. I'd be very interested in those rears if you were to sell them. I can't see the picture... they're 15x10's with 3 1/5" B.S. right? What kind of shape are they in? Let me know!!!

Jim you buy his 15x10's and he can buy mine graemlins/hurray.gif

hmmmmmm..... where did he go?

:confused:

Sorry I have not been the wheels and tire section for awhile.

Redman1, looks nice, I have the prostars on my 67. 275-60-15 8inch,rear 4.5bs. Front 235-70-15 6inch 3.5bs. I couldnt get a 10inch rim to fit without clearence problems.

Sgtpop I am going to look for a set of 10’s with the 5.5 backspace so they will fit within the fender wells. By the way Sharp Chevelle

I Have BB springs on the front of my Chevelle
with El Camino springs ( new from moog )
on the rear. I just put 15x7 torque
thrust w-245/60's with 3.5 Bs on the
front. On the backI have 15x8 torque
thrust w/255-60's with 3.5 bs. and
have no clearance issues at all.
My 69 sits level and looks like old School.