Captain Kirk
Feb 10th, 00, 8:23 PM
I need an intermediate steering shaft coupling seal for my 69 Conv. and I can't seem to be able to find one. http://www.chevelles.com/forum/mad.gif
TIA Kirk
[This message has been edited by Captain Kirk (edited 02-10-2000).]
Philip
Feb 10th, 00, 8:53 PM
Are you referring to the upper slip joint by the firewall? Have you tried the GM dealer?
Captain Kirk
Feb 11th, 00, 5:51 AM
64elcamino,
No, I am talking about the intermediate coupling joint on the lower shaft. It is between the lower coupling and the firewall. It is a rubber seal and it was ripped when I got the car and I really need a new one.
Kirk
Philip
Feb 11th, 00, 8:12 AM
Is yours round or oval? I have a round one about 2 1/2". It is used but good.
DUKE 69
Feb 13th, 00, 12:19 PM
Kirk,
I just finished doing my steering shaft and also had to replace the seal. It is still available from GM part #7802919. Be very careful and you can work it onto the shaft w. no problem. Alittle silicone spray in the right places may help too. Good luck.
Duke
------------------