hello ya'll.. i have 2 15*6 cragar s/s's that i had got from a friend.

i was thinking about using them on he front and getting a pair of 15*8 or 10's w/ 5 to 5.5" bs.

i was wandering if cragar has the s/s's w/ a 5 or 5.5" in either of the 15*8 or 10's. or will i have to get them custom made? ive seen them w/ 4.5" bs but that wasnt enough..

and one more thing.. the 5 or 5.5" bs w/ 295/50 rubbers on them will clear w 71 fenderwell (rear) right?


aaron

If you get the 15x8's you'd be fine with 4.5" of backspace. If you go with the 15x10's, they would need 5.5" bs and I don't know if Cragar makes them that way. Check their web site. I've been there and do remember that it lists all the standard sizes and backspacing for each wheel that they make.

u dont want ur wheels ill take them off your hands graemlins/thumbsup.gif

thanks man.. i will look into it more and post what i find.

what wheels are you talking about. the keystones or cragars?.. im sorry im still keeping them. but if i go to getrid of them.. ill let ya know.


aaron

i was doing some searching and i could find was that they came with the biggest 4.5" bs.

so i guess ill be getting a pair of 15*8's.

also.. does anybody happen to know what bs you need to run a 245 50 ish tire on the front?


aaron

Originally posted by BowtieAaron:
i was doing some searching and i could find was that they came with the biggest 4.5" bs.

so i guess ill be getting a pair of 15*8's.

also.. does anybody happen to know what bs you need to run a 245 50 ish tire on the front?


aaron

Originally posted by ss454miami:
</font><blockquote>quote:</font><hr />Originally posted by BowtieAaron:
i was doing some searching and i could find was that they came with the biggest 4.5" bs.

so i guess ill be getting a pair of 15*8's.

also.. does anybody happen to know what bs you need to run a 245 50 ish tire on the front?


aaron </font>[/QUOTE]Im running 245/60's on Cragars in the front with 4.5 BS. not a problem. On the rear I have 295/50's on the same 15X8 Cragar rims. Had a slight rubbing problem on the right side which I corrected using a set of AirLift air bags with about 15 lbs of air. Car does not look "jacked up" but it does prevent the spring from full compression and rubbing.
Hope this helps.
SS454miami@aol.com

hey man thanks!

did you roll the lip and still had that problem? i will probly be running them bags anyways becasue of the motor i will hopfully be building in the near future..


thanks again.


aaron