What's the cheapest set of wheels I can get in this size? I've been looking at wheel vintiques. I think they're like $70 each. Any other place that sells a cheap wheel that size. It doesn't have to be a ralley.
----Ryan

------------------
1970 'Velle Project/Daily Driver
355 Vortec/ Comp XE262 w/1.6 roller rockers
Th-350 B&M 2400 stall, Powertrax 10 bolt w/2.73
I'll have some track times SOON!

Are you seriously looking for CHEAP (and not just as cheap as you can get and still look good)?

1) go to the junkyard, you can find a cheap set of old alloy wheels, or possibly some mid-70s chevy or BOP rally wheels.

2) Go to a major tire dealer, such as Les Schwab or even Sears. They usually have stamped steel wheels with triangles cut out to make an 8-spoke mag. Usually, you'll see these on trucks or trailers, but you can get them for cars. Last time I checked they were $25 each.

One again I need a backspacing of 4.5 inches. This is not a standard backspacing. This is the key here.

Wheel Vintiques has that wheel for $50, it's their Series 38, has F*ord and Chevy bolt patterns, 15x8x4.5.

See http://www.wheelvintiques.com/cat2002.PDF which is a large acrobat .PDF file. Scroll down the left side to the series 38's.

Tom

Those same wheels for Jegs are 70 bucks. Pretty cool. Thanks Tom.
----Ryan