I wanna stuff the biggest tires possible under my chevelle not necessarily BIG just WIDE!! Give it that tough look http://www.chevelles.com/forum/smile.gif So could neone tell me what i should do...i read in carcraft that u could fit 13 in wide tires under it if u beat in the fender a little what do u have for me...thankx

I think its 295/50/15 or 295/60/15 with a 10" rim.

I have run upto 325/50s on my 68 with a 10 inch rim and 5.5 inches of backspace. The 325s needed a slight(1/2 inch maybe) whell well lip roll which I was unwilling to do to my car. I currently have 305/50s on the same rims and they are almost perfect. I only get a slight rub that basically squeegees off the tire dressing. I have also run 295/50s on an 8 inch rim with 4.5 inches of BS and there was no rubbing. Pics on website show 325s and 295s. the 275/60s were pulled to go wider and they rubbed but that was due to not enough BS. Any specific questions ore info request shoot me an email if you want. Good Luck http://www.chevelles.com/forum/smile.gif

------------------
Jeff Angerstein
ACES#841 TCG#158 CECCO #16
68 SS396(roller 454)
68 Pro Street
69 SSRS 396(427) 4spd For Sale see ad @ <A HREF="http://www.camaros.net
" TARGET=_blank>www.camaros.net
</A> 87 MC SS For Sale Too
99 K2500 Burb 7.4L(454)

My Chevs (http://www.tcg158.homestead.com)
OLD BLUE (12.27@107.9) (http://tcg158.homestead.com/files/drvr.jpg)
(10 second motor in a 14 second chassis)

It also depends on if you have your car raised or lowered in the rear.I have a 2" drop in the rear so i don't think the 305's or maybe even the 295's would fit.

What do you have 18chevelle468?

I have 15 x 10's with 275 60 15's and the car rides pretty low and I still have plently of room. I would say a good 1-2 lower than it should be from stock…

------------------
1970 chevelle
406 - TH-350 - soon to be 411's
406velle (http://www.406velle.150m.com)

2 yrs into a rebuild and still breaking things twice and fixing it on the third.

right now its stock height in the back im gonna get air shocks put back their to raise and lower it alittle...what exactly is backspacing???? and as far as inches wide without any modifications what could i fit in there?

Hands down the biggest I have seen in stock inner fender wells is a 15 x 10 with a 5.5 BS.

The backspace is the measurement between the inside lip f the rim and the inside mounting surface.

Do you plan on racing the car at all?

------------------
1970 chevelle
406 - TH-350 - soon to be 411's
406velle (http://www.406velle.150m.com)

2 yrs into a rebuild and still breaking things twice and fixing it on the third.

yea i plan on running it down the strip a few times a month...