Hey all, you have been great help in the past and I know need some advice....

I got some really nice G6 seats of ebay for next to nothing thinking they would mount similar to the new GTO seats.

Now I have them and the fronts mount with hooks instead of bolts.

Now I was thinking I could.....
-- cut of the hooks and make my own adapter to bolt in into the existing
bolt holes.
--mount a piece of unistrute into the car and drill a hole through the sides
of the unistrute and the hooks then secure with a bolt.
--does anyone know if the G6 has a removable mount that I could just
transplant into my car? I will try to make to a junk yard this weekend to
check on this one.

At the time I was doing research I seem to remember finding multiple people who have done this mod but cant seem to find alot of info now.:confused:

Curious to see what those seats look like. I was thinking C5 Z06 seats or GTO seats. I have the stock buckets but I was wanting something with a little more support and comfort. Post some pics of your new seats.

The seats are good looking and very comfortable

They look pretty nice. Your best bet is going to be to just weld a bracket to the bottom to bolt to your original bolt holes. Did your car have factory buckets? I think if you don't add some kind of bracket to the bottom they will sit too low unless you are very tall.

Yea I am 6' or so; I keep going back and fourth with the idea of getting the seat to set up higher. When I decide what to do I will post some pics of the final setup.

Thanks for the advice!