|
71rat Apr 2nd, 02, 9:56 PM hey problem here! if i use a 15x10 wheel with only a 5 inch backspace (Centerline convo pro or Weld aluma-star) will a BFG P315/60R15 fit in the stock tub? I have read nearly all the past messages and realize 5.5 backspace is perfect for a 71, but the only wheels that offer that backspace are Weld draglite and other ho-hum looking wheels eagerly waiting thanks! MAXX2 Apr 2nd, 02, 10:00 PM Some Team Members have stated that the companies will give you any backspacing you want by calling them. Team Members?! Chime In?! ------------------ Team Members Forever #341 Richard, Judy, MAXX2 '69 Elke (Frame Off); GM HO 350/330-Mildly Ported Vortec Heads-Manley Severe Duty SS 2.02/1.60 Valves, Comp Cams Full Roller Package (Magnum)-Custom Grind CS 3315/3316 HR112-.510/.520 Lift, Edelbrock Air-Gap W/750 Performer Manual Choke-Performer 100 HP NOS, March Pulleys, 4L60 (Non Computer) W/Lokar Shifter, 12 Bolt Posi. Richss396 Apr 3rd, 02, 11:48 PM Check out the 15 x 10 (5.5"BS) Monocoque RT's and BFG 325's on Wes Colby's site.... http://bruteforcechevelle.freeservers.com I have the same combo on my 69 and they look killer and fit with just minor lip trimming... Rich Hexemer 69 SS396 | ||