|
von Oct 14th, 99, 4:45 AM Can someone tell me the proper routing of the speedo cable on a '69 4 sp from the floor to the trans? A '70 assembly manual looks like it goes under the front of the trans, then back on the pass. side to the tailhousing. von DZAUTO Oct 14th, 99, 9:55 AM My 70 has the cable coming out and down, at about 45deg, of the rt side, then it curves back up and goes over the top and on up to where it enters the firewall. ------------------ Tom Parsons tom3 Oct 14th, 99, 3:23 PM Might look at the floorpan on pass side just beside the front of the trans. Might be a metal clip welded to the floor that bends around the cable. This will fix the routing. tom von Oct 14th, 99, 4:33 PM Thanks for the replys. No clips are present. The floor pan was replaced by a previous owner. von Tom Lasater Oct 14th, 99, 7:08 PM Von, my 69 has a metal clip that goes around the cable and is bolted/screwed to the floor pan. I'm sure it's the original setup. ------------------ Team Chevelle Gold #33 ACES Member #02913 Chevelle Club of Michigan Livonia, Michigan | ||