|
: Guess the wheel & tire size? CT Mark Apr 1st, 02, 12:00 PM Can anyone guess the wheel and tire size of this car? I like the look. Looks like 15's. Who knows...maybe the new or prior owner is here on TC! Thanks in advance. http://www.cars-on-line.com/67chev2516.html Midnight Marauder Apr 1st, 02, 1:02 PM My guess is 15 x 10 rear and 15x8 front. Survey Says!? *Looking around for Louie* ------------------ '70 SS 396 4spd, 4.10's and a smile TC# 1341 Beaux The SS (http://www.chevelles.com/showroom/btmyss.JPG) My sloppy engine bay (http://www.chevelles.com/showroom/btmill.JPG) Life is a gateway drug that leads to Chevelle addiction. Beldarr Apr 1st, 02, 2:05 PM I would also say 8/10 x 15. As for tire size, maybe 245-60-15 on the front, 275-60-15 on the back. That is a nice look http://www.chevelles.com/forum/smile.gif ------------------ Tommy B. 71-72 Malibu (http://www.geocities.com/beldarr/Chevelle.htm) "I'm high all right, but on the real stuff High octane gasoline A clean windshield And a shoe shine" Steve R Apr 2nd, 02, 12:17 AM I would say 15x8 all the way around. Looks like a slightly taller tire on the rear than front. Steve R Chuck Apr 2nd, 02, 2:23 AM Maybe I have the winning answer. Hey that's my car!!!! Just kidding, but it's close. Look at the link below. The max you can fit on the car without scraping is 15x8 with a 4.5 inch offset on the back and 15x7 with a 4 inch offset on the front. That's what I have.... and no you can't buy it (ha ha). Chuck ------------------ Chuck Bonasera chuck@chevelles.net http://nor-cal.chevelles.net/chuck.html 67ss Apr 2nd, 02, 6:21 AM Hey chuck,what is the width of the rear end? ------------------ John 67ss ACES #2887 Team Chevelle Gold #127 CT Mark Apr 2nd, 02, 8:06 AM Chuck, I didn't think the 15x10's would fit without major scraping or tubs. Nice ride you have there! What size tires do you have? Yella MAXX2 Apr 2nd, 02, 9:45 AM Chuck; Can you post a bigger picture of that great looking exhaust system? Or just attach it to an email to us. Thanks. ------------------ Team Members Forever #341 Richard, Judy, MAXX2 '69 Elke (Frame Off); GM HO 350/330-Mildly Ported Vortec Heads-Manley Severe Duty SS 2.02/1.60 Valves, Comp Cams Full Roller Package (Magnum)-Custom Grind CS 3315/3316 HR112-.510/.520 Lift, Edelbrock Air-Gap W/750 Performer Manual Choke-Performer 100 HP NOS, March Pulleys, 4L60 (Non Computer) W/Lokar Shifter, 12 Bolt Posi. | ||