|
C.W.Mellow Mar 24th, 02, 4:41 PM I have a pair of ET Streets (26X10.5) and was wondering if I needed longer wheel studs for the rear lugs at the track? BTW I have an auto and a mild BBC. TIA ------------------ *Chris Mellow *1970 Chevelle Malibu (http://www.geocities.com/cwmellow) *402BB/TH350 Pearl Blue, Chrome Ralleys *God Bless America bill henry Mar 24th, 02, 8:39 PM As long as you are not using thick hub aftermarket wheels, you will be fine with stock studs. C.W.Mellow Mar 24th, 02, 11:45 PM They are on chrome ralleys so it looks like I dont have to get them... Thanks! Gandalf80 Mar 25th, 02, 9:58 AM I believe the rule is that the wheel stud should stick out the end of the nut the same amount as the stud diameter. So if you have 7/16 wheel studs, there should be 7/16" of the stud sticking out past the nut. On my car there are only about 2-3 threads that stick out through the nut, but i've never been hassled about it. ------------------ Chris Dagenais '71 Malibu with a home built 454! 12.7@107 For everything you do, this burnout's (http://www.71malibu.com/Burnout.wmv) for you. The Green Monster (http://www.71malibu.com) | ||