I have an auto meter brake pressure gauge that i would like to install in my chevelle next to temp and oil press gauges. i will connect it to the extra port on the line lock. question: i assume i will need to bleed the line to the gauge, any suggestions on how to accomplish this?

Good question. Is there two ports on the gauge?

If so I would probably try to install a bleeder screw on one of the sides and bleed it that way :confused:

I would have to see the gauge (pic?) to know what to do.

Joe

There is only one fitting on the back of the gauge, would be nice if there were two so that you could install a bleeder. it would be really messy, but i suppose i could pressurize the system then just crack open the line slightly to bleed. I called baer racing and they didn't have an answer, i guess i'll call auto meter next.