Application is for a 1969 Chevelle. Does any one have the measurements for drilling the sway bar holes in the rear lower control arms?

Thanks;

Tony

I seen that in the old Tech Pubs section

From the TECH articles linked in the blue bar at the top of the page...
http://www.chevelles.com/techref/ftecref16.html

You need to box the arms or insert a reinforcement in them so the sway bar bolts don't collapse the arm.

Check this site of a team member, everything you need to know about a body control arms.

http://www.leverfamilysite.com/GM_A_body.htm